Measuring A Window For A Curtain Pole

It’s extraordinary how much gets done around the house when you are actively discouraged to leave it. What about that window you’ve been meaning to spruce up for ages? How difficult can measuring up for a Made by the Forge curtain pole be? Answer? Not at all… Just three simple steps… W. W. W. – Where, Width, Work out…

1. Where is the pole going to go? Stand back, look at the window and check there are no beams, light switches or fittings in the way of a straight mount above the window. Ideally the pole should be mounted 15cm above the top of the window. If you have a low ceiling, it should be mounted halfway between the ceiling and the top of the window.
2. Width of the window to be measured.
3. Work Out 10% of the width of the window for each side’s drawback (the area the curtain hangs in when not drawn). Remember to allow for the thickness of your curtains and add one of two centimetres if necessary.

Also remember to take into consideration the length of the decorative finial at both ends, the size of your choice can be found on the finial’s product page online. We suggest adding one curtain ring for every 10cm of pole. Be sure to order an even number for symmetry.

You can find a video of Richard showing you how to measure up a window for a curtain pole. these points, please click here. As ever, any questions, give us a call on 01473 487118.