handmade to order Archive

Juliet Fishenden

Measuring A Window For A Curtain Pole

It’s extraordinary how much gets done around the house when you are actively discouraged to leave it. What about that window you’ve been meaning to spruce up for ages? How difficult can measuring up for a Made by the Forge curtain pole be? Answer? Not at all… Just three simple steps… W. W. W. – Where, Width, Work out…

  1. Where is the pole going to go? Stand back, look at the window and check there are no beams, light switches or fittings in the way of a straight mount above the window. Ideally the pole should be mounted 15cm above the top of the window. If you have a low ceiling, it should be mounted halfway between the ceiling and the top of the window.
  2. Width of the window to be measured.
  3. Work Out 10% of the width of the window for each side’s drawback (the area the curtain hangs in when not drawn). Remember to allow for the thickness of your curtains and add one of two centimetres if necessary.

Also remember to take into consideration the length of the decorative finial at both ends, the size of your choice can be found on the finial’s product page online. We suggest adding one curtain ring for every 10cm of pole. Be sure to order an even number for symmetry.

For a video of Richard showing you these points, please click here. As ever, any questions, give us a call on +44 (0)1473 487118.

Juliet Fishenden

At Made by the Forge we pride ourselves in offering a proper, old fashioned customer service. We have many products available in a standard size and we also offer a custom made service if you need it.

Button blog6

For example with our curtain poles we are able to make brackets at any projection to suit your needs. This is particularly helpful in old houses when the walls are not straight!

This is what one of our customers thought of our service:

“Made by the Forge makes a terrific handmade ironwork product and provides impeccable service. Richard is always available to provide advice and is very responsive to particular requirements. We were doing a major refurbishment project in Central London where each window needed poles and fittings adapted to particular tight fits and cornice situations, as so often happens in old converted buildings. Richard responded by making special fittings and finials; always quickly, efficiently, and at very reasonable prices. Plus this ironwork looks great with sophisticated fabrics. It would be a pleasure to use Made by the Forge again.” A.C. Chelsea, London

Hot bracket

We are thrilled that AC is thrilled and look forward to seeing some photos.